UL 719 PDF

 

1 Scope

1.1 These requirements cover nonmetallic-sheathed cables containing 2 – 4 thermoplastic-insulated circuit conductors, with a grounding conductor, in the constructions indicated in . These cables are intended for use in accordance with Article 334 and other applicable parts of NFPA 70. Type NMC cable is for use in dry, moist, damp, and corrosive locations, and Type NM cable is for use in normally dry locations. Both types carry the suffix letter “-B” to designate the use of conductors with 90 °C insulation.

Type

Construction

Number of circuit conductors

Size of circuit conductors

NMC

flat

2 or 3

14 – 10 AWG copper or 12 – 10 AWG aluminum or copper-clad aluminum

NM

flat

2

14 – 2 AWG copper or 12 – 2 AWG aluminum or copper-clad aluminum

flat

3

14 – 10 AWG copper or 12 – 10 AWG aluminum or copper-clad aluminum

round

2, 3, or 4

14 – 2 AWG copper or 12 – 2 AWG aluminum or copper-clad aluminum

NM with -PCS

flat

2 or 3

14 – 10 AWG copper or 12 – 10 AWG aluminum or copper-clad aluminum and 18 – 16 AWG copper control/signal conductors

round

2 or 3

1.2 A cable to which the designation “ST1” (signifying “limited smoke”) is applied as a type-letter suffix complies with the test criteria for smoke release and for cable damage height stated in UL 1685.

 

SUMMARY OF TOPICS

This new Fourteenth Edition of ANSI/UL 719 dated June 26, 2025 includes Flatwise Crush Resistance Test, 24.1 and Section 44.