UL 1786 PDF

 

1 Scope

1.1 This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and the National Electrical Code, ANSI/NFPA 70. Light source types include incandescent candelabra base lamps, non-replaceable lamps, [fluorescent, neon, or light-emitting diode (LED) type] or electroluminescent panels.

1.2 These requirements cover direct plug in nightlights for insertion into a parallel slot receptacle rated 125 volts maximum.

1.3 These requirements do not cover:

1. (a) cord-connected luminaires;
2. (b) nightlights with more than one receptacle;
3. (c) direct plug-in devices with other primary functions, such as room deodorizers, insect repellers, or rechargeable flashlights; (Note: A nightlight provided with non-rechargeable (replaceable) batteries is considered to be a flashlight); or
4. (d) direct plug-in devices utilizing plasma light.

 

Summary of Topics

This revision of ANSI/UL 1786 dated January 17, 2024 includes the following changes in requirements:

– Non-replaceable LED light sources shaped like filament lamps; 7.3.2.2, 7.18.2, 7.18.3, 7.18.4, 7.18.5, 10.7.3, 11.13, 11.13.1, 13.4A, 13.7, 13.8, Table 5, and Annex A

– Nightlights with integral USB ports; Clause 2, 6.3.1, 6.20, 7.22, and 7.22.1

– Nightlights with Rechargeable Batteries; 1.3, 6.2.1, 6.2.2, 7.23, 7.23.1, 7.23.2, 7.23.3, 7.23.4, 7.23.5, 7.23.6, 7.23.7, 8.5, 8.5.1, 8.5.2, 8.5.3, 8.5.4, 8.5.5, 8.5.6, 9.1.2, 10.8, 10.8.1, 10.8.2, 13.6, Table 5, and Table 6